WCDL-4 Bedding Recovery System
Dairy Cows Bedding Options production system is an efficient system independently developed by our company to separate undigested fibrous matter from cow manure as organic bedding (ZL2020 2 1129532.2). The system, consisting of a spiral extruder separator and a set of drums, enables the production of fresh organic litter on the farm every day, with a minimum of 48 cubic meters of litter.
- Product Introduction
Basic Info.
|
Model No. |
WCDL-1-45 |
Usage |
Fecal Dehydration Fermentation |
|
Application |
Cow |
Power Source |
Electric |
|
Heating and Ventilation Equipment Type |
Air Duct |
Epidemic Prevention Equipment |
Aerobic Fermentation |
|
Blade Type |
No |
Computerized |
Computerized |
|
Certification |
IS09001:2008 |
Condition |
New |
|
Warranty |
2 Years |
Customized Support |
OEM |
|
Body Length |
12m |
Width |
3m |
|
Height |
2.8m |
Power |
24kw/35kw |
|
Transport Package |
Container |
Specification |
6000*1100*60mm |
|
Trademark |
JG |
Origin |
Yixian, Baoding, China |
|
HS Code |
8479899990 |
|
|
Packaging & Delivery
|
Package Size |
254.00cm * 118.00cm * 148.00cm |
|
Package Gross Weight |
728.000kg |
Dairy Cows Bedding Options production system is an efficient system independently developed by our company to separate undigested fibrous matter from cow manure as organic bedding (ZL2020 2 1129532.2). The system, consisting of a spiral extruder separator and a set of drums, enables the production of fresh organic litter on the farm every day, with a minimum of 48 cubic meters of litter. The system is produced and developed with international automation technology, the aerobic fermentation process is carried out at 60-75 °C, the fermentation time is 8-36 hours, there is no need to increase the external heat source, the biological process is monitored by a temperature sensor, and the air flow can be adjusted. The organic bedding, which is produced free of charge from its own resources, is a guarantee for the health of the cows and the increase in milk production.
|
Item |
specification |
remark |
|
|
6-12m |
Suitable for 500 lactating cows |
|
|
12m-30m |
Suitable for 1000 lactating cows |
|
|
18m-45m |
Suitable for 2000 lactating cows |
|
|
18m-45m |
Suitable for 2000 lactating cows |
Contrast
|
Traditional bedding |
Bedding production system |
|
The microbial load level is unclear |
Reduced microbial load in the environment |
|
Causing rapid equipment wear and tear |
Small equipment wear and tear |
|
The supply of cushioning materials is not guaranteed |
There is a continuous supply of raw materials |
|
The padding cannot be processed |
Easy to use and handle |
|
High storage cost for cushioning materials |
Economy and Environmental Protection |
|
Causing an increase in solid content in feces |
be even quality |
|
Large amount of labor |
Low workload |
|
High purchase cost |
Circular use |
|
Higher cost of fecal treatment |
Reduced the cost of manure treatment |
|
--- |
Cows have high acceptance and clean body surface |
|
--- |
Improved the comfort and health of cows |
|
--- |
Reduced the risk of cow injuries |
|
--- |
Reduced irritation to cow skin |
Product Parameters
|
Operating temperature in the drum |
60-75 ºC |
|
|
|
Fermentation time |
8-36hour |
Depends on how the manure is managed |
|
|
Litter yield |
12-30 |
30m³/day |
The yield is the maximum value |
|
18-45 |
45m³/day |
||
Detailed Photos
Partial close-up picture
|
|
||
|
Special-purpose separator |
||
|
|
|
|
|
Feed hopper and exhaust air system |
Power-saving drive motor |
Wireless temperature detection terminal |
|
|
|
Human-machine interaction monitoring interface of the control cabinet |
|
|
|
The moisture content of the produced bedding material. |
FAQ
|
No. |
Common fault manifestations |
Possible factors for malfunction |
Solution |
|
1 |
The control system does not work after being powered on, and all button switches are invalid. |
1. There is an alarm that has not been resolved. |
1. Check the relevant equipment according to the alarm prompts. |
|
2. Power phase sequence error. |
2. Check and correct the phase sequence of the power supply. |
||
|
2 |
The fermentation temperature of the material is lower than the expected value |
1. There is too little material inside the barrel. |
1. In daily operation, attention should be paid to maintaining a balance of incoming and outgoing materials. |
|
2. The moisture content of the material entering the stabbing body exceeds the standard, which affects the fermentation effect. |
2. Control the moisture content of the materials entering the barrel well |
||
|
|
3. Check if the ventilation fan is running properly. |
||
|
3 |
Overload alarm during centrifuge operation. |
1. The material concentration is not appropriate. |
1. Adjust the material to the appropriate concentration. |
|
2. There is a foreign object blocking the sieve in the material. |
2. Check and clean the sieve. |
||
|
|
If there are no issues with the above, please contact the manufacturer for maintenance. |
||
|
4 |
The separator cannot start normally when restarted after shutdown |
The interior of the separator is filled with materials, resulting in excessive yang force. |
1. Reduce the weight of the discharge port, manually reverse it, and then start it normally. |
|
2. Before stopping the machine, the feeding and separator should be stopped first, and the machine should be stopped after idling for 20 seconds. |
|||
|
5 |
The moisture content of the finished cushion material is high |
1. The temperature during the fermentation process inside the barrel has not reached the set value. |
Solution refer to 2 |
|
2. Insufficient ventilation during the fermentation process. |
|||
|
3. The moisture content of the material entering the stabbing body exceeds the standard, which affects the fermentation effect. |
|||
|
Kind reminder: Good daily maintenance is a necessary condition to ensure the normal operation of equipment. Please refer to daily maintenance for details. |
|||
Company Introduction
Hebei Junguang Animal Husbandry Technology Co., Ltd. is a high-tech enterprise specializing in modern pasture design, construction, production and sales of livestock breeding equipment. The company is located in Yi County Economic Development Zone, production workshop 9000 square meters, office complex building and ancillary facilities 3500 square meters. The company specializes in R & D, production of ranch supporting facilities and equipment. Product varieties cover the feeding class, environmental cooling class, manure treatment class, and other special equipment for the pasture, the company's products with cost-effective, good quality advantages to obtain the consistent praise and trust of the pasture.
Hot Tags: WCDL-4 Bedding Recovery System, China WCDL-4 Bedding Recovery System manufacturers, suppliers, factory, bedding revival system for campsites, Single Axis Rolling Shutter Motor, Wear resistant feet, 860w Ventilation Fan, Pvc Roller Shutter Fabric for Breeding Farms, Milk Hall Spray Cooling System
